HP DESKJET 5552 COLOR INKJET PRINTER DRIVER DOWNLOAD

January 23, 2020   |   by admin

Remove the output tray. Click the tab that provides paper type and size settings. Turn the printer off and then on Press the Power button to turn off the product. Perform a power reset Follow these steps to reset the product. Make sure that plain white paper is loaded in the input tray.

Uploader: Tadal
Date Added: 22 March 2005
File Size: 11.25 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 22818
Price: Free* [*Free Regsitration Required]

The Power light is on In this normal condition, the following light pattern displays on the product control panel:. The product is turned off, or there is an issue with the power source. The following sections describe the most common combinations of blinking lights, followed by solutions for each combination.

A clean, lint-free cloth, or any cloth that will not come apart or leave fibers. Follow these steps to clear any jammed paper. Follow these steps to perform a reset. Solution Press the Resume button to eject the banner paper. If you have completed all the steps listed above and are still experiencing a problem, continue to the Service the printer section at the end of this document.

The Power light and the Resume light blink alternately In this error condition, the following light pattern displays cklor the product control panel:.

  CISCO CABLE MODEM DPC2100R3 DRIVER DOWNLOAD

Follow these steps to load paper. Lights and buttons on the product control panel. Purchase replacement cartridges and other supplies from the HP Store or local retailers.

HP Deskjet Standard Inkjet Printer | eBay

Use both hands to pull out whole sheets of paper to avoid tearing them. The Power light is on and the Resume light blinks when trying to print on banner paper When trying to print on banner paper, the Power light is on and the Resume light blinks.

Adjust the print settings The product might not pick up paper if the paper size and type in the paper tray do not match the size and type settings in the print driver. Perform a power reset Sometimes, resetting the product can clear a paper feed issue. Insert the duplexer into the rear of the product, and then push it forward until it snaps into place.

Load paper The product might be out of paper. Remove jammed paper from the front of the product only as a last resort.

Blinking Lights on the HP Deskjet 5551 and 5552 Printers

Check the condition of the paper. Follow these steps to determine the cartridge issue, and then continue to the next section for solutions to resolve the issue. Remove the stack of paper from the tray. Solution No action is required.

  HP ENVY PHOTO 6255 DRIVER

If these steps resolved the issueyou do des,jet need to continue troubleshooting. While holding the Power button, press the Resume button four times.

Hp Deskjet Manuals

If the test page does not printcontinue with the next solution. The Power light and the Print Cartridge light are on. Clean the paper pick rollers inside the product Your product has either a rear access door or a duplexer. Insert a new cartridge Follow these steps to insert a new cartridge. Remove the rear access door.

The Power light is on and the Resume light blinks In this error condition, the following light pattern displays on the product control panel:. The yellow arrow points to the Dewkjet Cartridge Low-ink icon.

Follow these guidelines when choosing paper:. Remove the output tray. The product might go through a warm-up period which might last dskjet to two minutes.

Do not use paper that has previously been printed on.